Lumax – Flush Mount Directional Covert LED Hide Away Light – Single/Dual Colour – 12/24v

The Lumax product range is our latest addition to our single, dual & tri colour LED Modules.

• The Flush mount hide away light can installed flush to a surface by means of a 25mm/1 inch hole or by mounting at 90 degrees with the optional bracket. This enables the lights to be mounted all over the vehicles interior or exterior.
• The dual colour version has 2 input wires, 1 for each colour so that each colour can be controlled separately and then when both input wires are connect both colours will alternate flash!
• ECE R10 & R65 approved in amber & blue colours utilizing 8 x 3 Watt LEDs, 4 LEDs for each colour!
• There are 2 input wires, 1 for each colour so that each colour can be controlled separately and then when both input wires are connect both colours will alternate flash!
• The TIR lens reflector design creates such a powerful and intense directional warning light that will give some traditional larger LED modules a run for their money!
• Theses LED modules are designed to sync and connect to multiple products within the Lumax range that we now have in stock!

Main Features:

– Dual voltage 12/24Vdc
– ECE R65 & R10 Approved
– Generation III 8 x 3 Watt LEDs (24W)
– Aluminium construction
– Weather and vibration resistant
– Self-contained, built in flashing unit
– 15 patterns per colour
– Alternating or simultaneous flashing between multiple modules
– 180 degree wide angle optic lens design
– Long life LED technology
– Memory to remember last selected flash pattern
– Fixing type: 2 point
– Mounting type: flush/bracket
– 200mm of 4 core cable

Sync group: G
(sync groups are product lines that will sync together, check sync group filter on product category for more products)
Sync group G information; *Up to 20 modules will sync for alternating, simultaneous, or split flash patterns

Technical Specifications:

– Voltage: 12-24 / 10-30 Vdc
– 8 x 3 watt LED elements
– Average current draw: 0.43A @ 12V

Box Contains:

– Lumax Flush Mount Directional Hide Away LED Module
– Mounting screws
– Instructions

Optional Extras:

– 90° Bracket

Wiring Information:

Red Wire: Positive, Colour 1 ON/OFF
Blue Wire: Positive, Colour 2 ON/OFF
Yellow Wire: Synchronization/Flash Pattern Select
Black Wire: Negative, Ground

Example of Dual Colour Mode Blue/Amber Lighthead:

Positive power (switched on) to Red wire only = emits colour Blue only.
Positive power (switched on) to Blue wire only = emits colour Amber only.
Positive power (switched on) to Red & Blue wire = emits colour Blue and Amber.

Dimensions in mm:

Without Bezel
Base diameter – 39mm
Lens diameter- 25mm
Base height – 10mm
Lens height – 12mm

With Surface Mount Bezel
59 L x 27 W X 47 h

See pictures for more information of dimensions.

Approvals:

– E9
– ECE R65, R10
– IP67

Warranty:

2 Years manufacturer warranty

Part Number:

LM.FMDH