RVL – Lazer™ VisorBar – Interior Visor LED Strobe Light Bar – 60 LED

The Lazer LED Visor Light Bar is even more powerful than the standard VisorBar, it features 60 x 3-watt SMD LEDs producing 180 Watts of brilliant illumination with a protective flashback shield. The 2-part light system, both driver and passenger sides, of the Lazer form a wide, brilliant light span created by the polycarbonate, linear lenses.

The visor light has 26 flash patterns: cycle, side by side, in and out, chasers, all, split and random. A press of a button can make the lights flash from left to right, right to left, or centre out.

The power cord plugs into the lighter and has an On/Off switch; for easy, quick access the main digital controls are located on the back of the system between the 2 bars. Alternatively, the cigarette plug can be removed and hardwired into your own switch or control system. The Visor Light Bar was originally made for the visor of police and emergency vehicles, but it can be fitted to the interior rear window as well.

Supplied complete with cigarette plug connector, flashback shield, adjustable mounting bracket allowing installation to the sun visor mounts.

Main Features:

– Dual voltage 12/24Vdc
– 60 x Generation III 3 Watt LEDs (180W)
– 26 User selectable flash patterns
– Alternating or simultaneous flashing patterns
– Optional White LED takedown/spot lights (will flash when not set to steady)
– Average current 2.0A @ 12V
– Fixing type: 4 point
– Mounting type: bracket kit (see pictures for installation)

Control panel

– On/off – turns unit on and off by depressing button
– Take Down – turns 1 LED module each side to a steady on mode (not flashing) or to flash mode by depressing the button. The LED modules with this option are located to the inner side of the visor.
– Arrow left – directional pattern feature when button is depressed will provide a direction left pattern
– Arrow centre out – directional pattern feature when button is depressed will provide a direction centre out pattern
– Arrow right – directional pattern feature when button is depressed will provide a direction right pattern

In the Box

– 2 LED Lazer visor light bars (Driver/Passenger)
– 2 Sets of visor mount brackets
– Cigarette plug with ON/OFF switch
– 1.5 meter power cord
– Flashback shield

Installation:

These light bars are attached with visor mount brackets by loosening the screws of the visor in the vehicle and slipping the clips behind them. There’s a photo showing examples of installations. Installation takes about 5 to 10 minutes.

Dimensions in mm:

– 430 L x 35 H x 157 D (per visor)

Approvals:

– E9
– ECE EMC R10
– IP 52

Warranty:

2 Years manufacturer warranty

Part Number:

LAZER-VISORBAR